Loading...
Optima SprayFoam is a Tempe-headquartered, licensed (CR-40 362887) and fully insured spray foam insulation contractor serving homes and businesses across the East Valley. Our installations deliver meaningful R-value gains, lower AC bills under Arizona's desert heat, and a Dust-Free Guarantee on every job — backed by a lifetime warranty and free performance checks.
Tempe homes face a punishing thermal environment. Attic temperatures routinely reach 140–160°F during summer afternoons, monsoon season pushes humidity through every gap in your building envelope, and fine desert dust filters through standard fiberglass batts year-round. Traditional insulation simply wasn't engineered for this.
Spray foam insulation creates a monolithic, airtight barrier that stops radiant heat before it loads your AC, blocks moisture intrusion during monsoon storms, and seals out the dust that drives allergies and HVAC wear. That's why Optima customers across South Tempe, Warner Ranch, Kyrene, and the ASU area report dramatically smaller cooling bills after a single install — most homes in Tempe are under-insulated by current standards or losing significant conditioned air through hidden gaps.
If your 1990s or 2000s tract home still has the original fiberglass, you're paying for it every month on your APS or SRP bill.
We install both open-cell and closed-cell spray foam for residential, commercial, and new-construction projects across Tempe and the surrounding East Valley.
Most Tempe homes lose the bulk of their cooling through the attic. We install closed-cell spray foam directly to the underside of your roof deck, transforming a 150°F attic into a conditioned space within ~10°F of your living area.
Radiant heat blocking, AC load reduction, ducts run cooler.
New builds and existing walls via injection foam.
Moisture and pest barrier where they exist in older Tempe stock.
A popular ASU-area retrofit for ADUs and rentals.
We handle commercial-scale installs across Tempe's industrial and retail corridors — from warehouses along Priest Drive and Broadway to retail buildouts and restaurant cold-storage rooms.
Full envelope sealing, reduced HVAC tonnage requirements.
Quieter interiors, lower utility costs, comfort consistency.
Closed-cell foam doubles as a Class II vapor barrier.
We work directly with Tempe builders and remodelers during framing, allowing for tighter HVAC sizing and full code compliance from day one.
Tailored solutions matched to your build phase and timeline.
Most Tempe homes drop a full ton of AC capacity after foam.
Vapor barrier and air-sealing performance that meets Tempe IRC.
We coordinate with electricians, plumbers, and HVAC subs to seal every penetration.
The right product depends on the application, but in Arizona's climate the choice is usually clear.
Softer, expands further, and excels at sound dampening. Our go-to for interior walls and budget-conscious whole-home installs.
Rigid, vapor barrier, adds structural strength, resists moisture. The right call for nearly every Tempe attic and crawl space.
Our recommendation for most Tempe attics: closed-cell foam delivers the best return — it stops radiant roof heat, blocks monsoon moisture, and earns a higher R-value in less depth.
Spray foam is a two-part polyurethane that arrives as separate liquid components. At the spray gun nozzle, the components mix and react, expanding 30 to 100 times their liquid volume in seconds. As the foam expands, it flows into and seals every gap, crack, and penetration — including the hidden air leaks that fiberglass batts can't address: HVAC chases, plumbing stacks, can lights, electrical boxes, and the gap where your top plate meets the drywall.
Once cured (within minutes), the foam forms a rigid, monolithic barrier that bonds permanently to the substrate. Unlike fiberglass, it doesn't sag, settle, lose R-value over time, or harbor moisture and dust. Our crews trim any excess within an hour and clean the workspace to our Dust-Free Guarantee standard.
In a Tempe context, this airtight envelope is what stops the desert from running your home. When your AC isn't fighting 140°F+ attic heat radiating downward, it cycles less, runs cooler, and lasts longer. When monsoon humidity can't penetrate your roof deck, your interior stays drier and free of mold risk. And when fine desert dust can't infiltrate the building envelope, your indoor air quality measurably improves — a meaningful difference for allergy-prone homeowners and households with kids.
Most Tempe homeowners ask about cost first, so we'll be transparent. Spray foam pricing depends on three things: the type of foam (open-cell vs closed-cell), the thickness/R-value target, and accessibility of the install area. Here's what to expect:
Open-cell spray foam
$0.45–$0.75 per board foot
Closed-cell spray foam
$1.00–$1.50 per board foot
Typical 1,500 sq ft Tempe attic (closed-cell, ~3")
$4,500–$7,500
Small 200 sq ft project (closed-cell, ~3")
$600–$900
Costs increase if existing insulation needs removal, if the space is hard to access (low-slope crawl spaces, vaulted ceilings), or if a thicker application is needed for a specific R-value target. Costs decrease for simple new-construction work where framing is open. Optima provides a free on-site evaluation with a written, fixed-price proposal — no estimate ranges, no surprise change-orders. Fast financing is available.
Our office is at 1305 W Auto Dr, Tempe — we live and work in the same desert climate you do, and most of our crew lives within 15 miles of your project. Faster response times, deeper knowledge of Tempe building codes, and accountability you can stand on.
Arizona license CR-40 362887, full general liability and workers' comp insurance, ICAA Qualified Contractor, BBB Accredited. Every install meets or exceeds Tempe IRC and energy code requirements.
Our work is backed by a lifetime warranty on materials and craftsmanship, plus complimentary performance checks to verify your insulation continues to perform exactly as installed.
Spray foam shouldn't leave your home a mess. Our crews follow a documented dust-control protocol — drop cloths, HEPA filtration, and post-job cleanup — that we back with a written guarantee.
Every Optima install is offset through verified carbon programs. Better for your AC bill, better for the desert.
We come out, measure with thermal imaging, walk you through your options, and leave you a written quote. No closing tactics, no time pressure, no upsells.
Optima holds a strong rating across Google, BBB, and Yelp from homeowners and businesses across Tempe and the East Valley. We invite every customer to share an honest review after their install — and we follow up with a free performance check the following season.
Brandon LaVallee
3 months ago
Michael Barber
3 months ago
Clay Netherlin
3 months ago
David Martel
3 months ago
Mike Rhea
2 months ago
tim derry
Edited a week ago
Ryan Jantz
a month ago
Paul Shetter
a month ago
Our Tempe HQ lets us serve every corner of the city quickly.
If you're outside this list but within 30 miles of Tempe, give us a call — we likely cover you.
We've refined our installation process over hundreds of Tempe-area projects to remove every common pain point: surprise pricing, dusty homes, missed deadlines, unclear warranties. Here's exactly how a project runs from start to finish.
Call (480) 568-5602 or fill out our online form. We'll book an on-site evaluation at a time that works for you — usually within 48 hours.
A senior estimator visits your home or business with thermal imaging equipment, measures your space, identifies air-leak hotspots, and discusses your goals — energy savings, sound dampening, moisture control, or all three.
You receive a detailed, fixed-price proposal in writing — scope, foam type, thickness, R-value target, timeline, and total cost. No estimate ranges, no surprise add-ons. Ask questions, request changes, take your time.
Our certified crew arrives on time, masks every surface that needs protection, and installs your foam to the agreed specification. We follow our Dust-Free Guarantee protocol throughout, and most residential projects complete in a single day.
Before we leave, we walk you through every treated area, verify coverage and thickness with a fresh thermal scan, register your lifetime warranty, and schedule your first complimentary performance check for the next cooling season.
Spray foam insulation is a two-part polyurethane material applied as a liquid that expands and hardens into a rigid foam. It seals gaps, blocks air movement, and delivers significantly higher R-value per inch than fiberglass or cellulose. It comes in two main types — open-cell (softer, lower density) and closed-cell (rigid, higher R-value, vapor barrier).
Most Tempe homeowners spend between $4,500 and $7,500 for a typical attic install with closed-cell foam, or roughly $1.00–$1.50 per board foot. Open-cell foam runs about $0.45–$0.75 per board foot. Final pricing depends on thickness, square footage, and accessibility — we provide a fixed written quote after a free on-site evaluation.
Yes — arguably more so than in any other climate. Arizona attics hit 140–160°F in summer, and that radiant heat drives most of your AC bill. Spray foam blocks it at the roof deck, reducing cooling costs significantly, lowering HVAC wear, and improving comfort upstairs. Most Tempe homeowners recoup the install cost through energy savings within several years.
Properly installed spray foam lasts the lifetime of the building. Unlike fiberglass, it doesn't sag, settle, lose R-value, or absorb moisture. Optima backs every install with a lifetime warranty and complimentary performance checks to verify long-term performance.
For most Tempe attics and crawl spaces, closed-cell is the right choice — it delivers higher R-value per inch, acts as a vapor barrier against monsoon moisture, and adds structural rigidity. Open-cell foam is excellent for interior walls and sound-dampening applications. We recommend the right product for your specific space during the on-site evaluation.
Most residential Tempe projects finish in a single day. Larger homes, full-envelope installs, or commercial projects may run 2–3 days. We commit to a completion date in your written proposal and stick to it.
Modern low-VOC spray foam is safe once cured (within minutes of application). During install, our crews use respiratory protection and ventilation, and we recommend occupants vacate the immediate work area for 24 hours as a standard precaution. We handle all prep — masking, drop cloths, HVAC isolation — and leave your home cleaner than we found it under our Dust-Free Guarantee.
Occupants should plan to vacate the immediate work area for 24 hours during installation. We follow strict safety protocols and provide clear preparation instructions before every Tempe project — including HVAC isolation, surface masking, and post-install HEPA cleanup under our Dust-Free Guarantee.
Ready to stop overpaying APS or SRP every month? Book your free on-site evaluation and get a fixed, written quote — no pressure, no obligation, no surprises.
Licensed CR-40 362887 · Insured · ICAA Qualified · BBB Accredited · Lifetime Warranty · Dust-Free Guarantee
Fast, fixed-price estimates for Tempe homes and businesses. No pressure, no obligation.
Speak to a Senior Estimator
(480) 568-5602